Catalyst OS Set command




--------------Set Command--------------------------


  • set port name 11/1 TINNINCUP-TEST01
  • set port speed 11/1 10
  • set port duplex 11/1 full
  • set port enable 11/1
  • set vlan 996 11/1
  • set vlan 420 name TINNINCUP-TEST01_DATA
  • set vlan 920 name TINNINCUP-TEST01_MGMT
  • clear trunk 11/1 2-1005
  • set trunk 11/1 on dot1q
  • set trunk 11/1 420,920 -----------------SHOW Command-----------------------
  • show cam dynamic 203 -->Use to display MAC in VLAN.
  • show cam dynamic 11/1 -->Use to display MAC in PORT.
  • show trunk -->To see all trunk port.
  • show trunk 11/1 -->To see information on a specific port.
  • TINNINCUP-TEST01> (enable) show port status 8/28 Port Name Status Vlan Duplex Speed Type ----- -------------------- ---------- ---------- ------ ----- ------------ 8/28 to TINNINCUP-TEST01 connected trunk full 10 10/100BaseTX TINNINCUP-TESTEC07> (enable) ----------------Config atm pvc---------------------- telnet TINNINCUP-TESTEC07 =================== sess 9 enable config t interface ATM0.203 multipoint description ID555555 atm pvc 565 0 565 aal5snap 15000 15000---->This is the VPI/VCI atm bind pvc vlan 565 203 ----->mix and match "atm bind pvc" ctrl/z wr or sess 4 enable config t int atm0.252 multipoint atm pvc 252 0 252 aal5snap 15000----> first VPI/VCI number. atm pvc 952 0 952 aal5snap 1000-----> second VPI/VCI number. atm bind pvc vlan 252 252---->same "atm bind pvc" atm bind pvc vlan 952 952---->same "atm bind pvc" ctrl/z wr